June 25, 2016
Our table in our White Water Retro 181B is a bit shaky and on our last camping trip I realized the screws holding the table stand down are popping up and stripped out from the OSB flooring. Has anyone experienced this or has a good solid fix? I was thinking of putting type of wood anchors in the holes and using some epoxy glue to help secure the table mount to the floor as well.
February 8, 2018
My screws stripped out as well. I ended up drilling all the way thru the sub floor and used stainless steel “T-nuts” and machine screws and sandwiched the table mounts and sub floor. Then very carefully sealed the t nuts from underneath the trailer with 100% silicone, covered with 3m rubberized spray. Be sure to completely seal them because any water gets into the sub floor and your in real trouble from rotting. also a good idea to lower the table during transit to eliminate stress on the mounts.
Most Users Ever Online: 177
Currently Browsing this Page:
Alabama Jim: 54
Captn Sharpie: 15
Guest Posters: 0
Newest Members:patvosburgh, pammy064, maineiak1, Laque, Sandy, carpae2812, Maddog, Lynae, neil.dawson, Shawno
Moderators: Roccosamore: 119
Administrators: Kristopher: 190